Tag Archives: barb makes things

Twisted Prism Lamps and CRASH THE PLANET

Posted on by

April 2, 2016 was CRASH Space’s first art show, and it went really well. We had tons of exhibits and a lot of people who came out to see it. Needless to say, it will happen again.

 

For the show, I made a set of twisted prism lamps, which are 3d printed, assembled with dremel friction welding, and contain rgb LEDs and motion sensors hooked up to an Arduino. I dedicated two whole Barb Makes Things videos to the creation of those, because they were rather involved. You can see the videos below or on my YouTube channel, and I also put together a video of a bunch of exhibits at the event (including some footage of my completed lamps), which is also below.

 

Barb Makes Things – How To: 3D Filament Rivets

Posted on by

You might have noticed that I use 3d printing filament frequently for attaching items together (particularly 3d printed ones that need a hinge, like the scissor mechanism on my Poking Device). I’ve made a quick How To video for my channel about the technique. Check it out below!

 

Let me know what other How Tos you’d be interested in seeing.

 

Musical Gears

Posted on by

Gears were part of the early designs of my first Hexachord, but they fell by the wayside in lieu of the videocassette rewinder motor. This is actually the reason that there’s a decorative gear at the center, and my event business card has a gear shape as well. 

 

In any case, I decided to revisit them and make a musical gear device. It’s my first multiple-part Barb Makes Things project. In the first part, I laser cut and assemble the gears, and in the second I add all of the musical elements, including assembling a gear that has its own strings and resonating chamber.

 

Take a look at the videos below!

 

Barb Makes Things: Arduino Hair Wrap

Posted on by

Finally, an Arduino video and a wearables video, in one! I do both frequently enough. This project is a combination of the hair wraps I did all through my teenage years and the electronics I didn’t dive into until my 30s. I did make an effort in this direction a few years ago with conductive thread, but it just wasn’t reliable. Then I was introduced by a friend at Two Bit Circus to silicone-covered wire. *choir sings* Perfect.

 

The Arduino board is a nifty new little thing by Qtechknow called the Qduino mini. It has a built-in lipo battery charger, meter, and switch, which makes it ideal for this project as I wanted to mount everything to the hair clip and leave it be. I’d like to expand this project to have more strands, potentially rgb LEDs, and some sensors (light and accelerometer, perhaps), but for now, it works and I like it. See video below.

 

If you haven’t already, go on over to my YouTube channel, Barb Makes Things, and check out my other videos. This is number eleven!

 

Barb Makes Things: Marble Run

Posted on by

In this post about tinkering and prototyping materials, I mention bamboo skewers and show a video of a marble run I built. I thought it was time I show the actual process of building one. This may expand to a larger thing, possibly to live on the walls at CRASH Space. The frame is made from dowels, and the rails and stops from bamboo skewers, and the whole thing is held together with hot glue. This makes for a quick, easy assembly and fast fun.

 

 

Keep an eye out for next week’s video, in which I use a Qduino mini.

Barb Makes Things: December and January

Posted on by

A roundup of my videos on Barb Makes Things from the last month or so:

 

LayeredringthefirstPhoto Dec 15 8 14 56 PM 1Photo Dec 20 9 13 47 AM

 

Layered Wood Pendant Necklace

I’ve been making a fair amount of jewelry lately, and Rockler has tons of great, super thin veneer sheets. There are a few tutorials on instructables about making bent wood rings, I decided to go another direction… literally. I’ve now made several rings with many glued layers, and which I finish with tung oil and cyanoacrylate (super glue), and in this video, I make a necklace in a similar style.

 

3D Cookies

When I say 3D, I mean that in multiple ways: I 3D modeled and printed custom cookie cutters, and the resulting pieces slot together to make a shape that stands up. I only show the process of modeling the tree cookie cutters, but I also created ones for a moose, which you do see toward the end of the video. They were tasty, and an awful lot of fun to make.

 

Tiled Desk

This is actually footage from back when I was first setting up my desk, so it’s technically my first video. I used floor tiles and hot glued them to a piece of plywood that rests on two small bookshelves. I could have used a more permanent adhesive, or done a finishing coat over the whole thing, but I wanted the flexibility to peel up and replace individual tiles, should they get damaged. And a hot glue gun is an often underestimated tool; the tiles are all staying perfectly.

 

Wooden Camera Arm

I’ve done a number of tutorial videos in the past, and the tripod is simultaneously helpful, and a huge pain. Getting the camera in the right place for the right shot is one thing, but when you need to reach around it to try to make something, all the while paying extra attention to staying in the shot, well… I knew there had to be a better solution. My first attempt was a custom frame for my camera that would hang from four hooks in the ceiling. It worked for a while, but wasn’t entirely reliable, and wasn’t remotely adjustable. Hence, the custom camera arm. I love mechanisms, especially ones made from wood, and this extending arm does the trick.

 

Wooden Toy Car

My work at the reDiscover Center focuses mainly on reusing materials, so this video shows a project that someone might make there (actually, cars are a popular thing with the kids who come in). I also spend most of this video working at the kids’ makerspace, so you get to see some of the tools that we (and the kids!) use there.

Barb Makes Things: Shrink Plastic Light-up Edison Bulb

Posted on by

I’ve long been a fan of shrink plastic (aka shrinky dinks), and I’ve done similar projects before, making 3d light up shapes with LEDs (see my instructable tutorial from a year ago), but I’m a fan of vintage and steampunk and I decided it was time for an Edison bulb with a wire cage surrounding it. A set of these would make for a neat decoration, and a friend from CRASH Space handed me an 8mm RGB LED at the last meeting, instructing me to make something like this to hook up to an Arduino. I’ll keep you apprised. 

 

So check out week 3 of Barb Makes Things, a Shrink Plastic Edison Bulb:

 

Barb Makes Things: 3D Papercut and Frame

Posted on by

Week 2 on Barb Makes Things: a dimensional papercut and custom frame. I’ve done a lot of papercuts before (including some that have prints available on society6), so I decided to do a small piece with a design I’ve done before.

 

Watch, enjoy, subscribe, and let me know what I should make next!